TC7SPN3125CFC 2014-03-01 1 toshiba digital integrated circuit silicon monolithic TC7SPN3125CFC low voltage/low power 1-bit dual supply bus buffer the tc7spn3125 is an advanced high-speed cmos 1-bit dual supply voltage interface bus buffer fabricated with silicon gate cmos technology. it is also designed with over voltage tolerant inputs and outputs up to 3.6 v. designed for use as an interface between a 1.2-v, 1.5-v, 1.8-v, or 2.5-v bus and a 1.8-v, 2.5-v or 3.3-v bus in mixed 1.2-v, 1.5-v, 1.8-v or 2.5-v/1.8-v, 2.5- v or 3.3-v supply systems. the a-input interfaces with the 1. 2-v, 1.5-v, 1.8- v or 2.5-v bus, the b-output with the 1. 8-v, 2.5-v, 3.3-v bus. the enable input ( oe ) can be used to disable the device so that the signal lines are effectively isolated. all inputs are equipped with prot ection circuits against static discharge or transi ent excess voltage. features (note) ? level converter for interfacing 1.2-v to 1. 8-v, 1.2-v to 2.5-v, 1.2- v to 3.3-v, 1.5-v to 2.5- v, 1.5-v to 3.3-v, 1.8-v to 2.5-v, 1.8-v to 3.3-v or 2.5 v to 3.3-v system. ? high-speed operation : t pd = 13.7 ns (max) (v cca = 2.5 0.2 v, v ccb = 3.3 0.3 v) t pd = 14.8 ns (max) (v cca = 1.8 0.15 v, v ccb = 3.3 0.3 v) t pd = 16.0 ns (max) (v cca = 1.5 0.1 v, v ccb = 3.3 0.3 v) t pd = 29 ns (max) (v cca = 1.2 0.1 v, v ccb = 3.3 0.3 v) t pd = 18.5 ns (max) (v cca = 1.8 0.15 v, v ccb = 2.5 0.2 v) t pd = 19.7 ns (max) (v cca = 1.5 0.1 v, v ccb = 2.5 0.2 v) t pd = 33 ns (max) (v cca = 1.2 0.1 v, v ccb = 2.5 0.2 v) t pd = 43 ns (max) (v cca = 1.2 0.1 v, v ccb = 1.8 0.15 v) ? output current : i ohb / i olb = 3 ma (min) (v ccb = 3.0 v) i ohb / i olb = 2 ma (min) (v ccb = 2.3 v) i ohb / i olb = 0.5 ma (min) (v ccb = 1.65 v) ? latch-up performance: - 300 ma ? esd performance: machine model 200 v human body model 2000 v ? ultra-small package: cson6(cst6c) ? low current consumption : using the new circuit significantly reduces current consumption when oe = ?h?. suitable for battery-driven applications such as pdas and cellular phones. ? floating a-bus is permitted. (when oe = ?h?) ? 3.6-v tolerant function and power-down protec tion provided on all inputs and outputs. note: do not apply a signal to any bus pins when it is in the output mode. damage may result. cson6-p-0.45 weight: 0.002 g (typ.) start of commercial production 2008-07
TC7SPN3125CFC 2014-03-01 2 pin assignment (top view) truth table inputs output oe a1 b1 l l l l h h h x z x: don?t care z: high impedance block diagram v cca v ccb a1 b1 oe logic level converter 1 2 3 6 5 4 a1 gnd v cca v ccb b1 oe
TC7SPN3125CFC 2014-03-01 3 absolute maximum ratings (note 1) characteristics symbol rating unit v cca ? 0.5 to 4.6 power supply voltage (note 2) v ccb ? 0.5 to 4.6 v dc input voltage (a1, oe ) v in ? 0.5 to 4.6 v ? 0.5 to 4.6 (note 3) dc output voltage (b1) v outb ? 0.5 to v ccb + 0.5 (note 4) v input diode current i ik ? 25 ma output diode current i ok 50 (note 5) ma dc output current i outb 6 ma i cca 25 dc v cc /ground current per supply pin i ccb 50 ma power dissipation p d 100 (note 6) mw storage temperature t stg ? 65 to 150 c note 1: exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in ic performance or even destruction. using continuously under heavy loads (e.g. the app lication of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temper ature/current/voltage, etc. ) are within the absolute maximum ratings and the operating ranges. please design the appropriate reliability upon reviewing the toshiba semiconductor reliability handbook (?handling precautions?/?derating concept and methods?) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). note 2: don?t supply a voltage to v ccb pin when v cca is in the off state. note 3: output in off state note 4: high or low state. i out absolute maximum rating must be observed. note 5: v out < gnd, v out > v cc note 6: mounted on an fr4 board. (25.4 mm 25.4 mm 1.6 mm, cu pad: 0.4mm 2 ) operating ranges (note 1) characteristics symbol rating unit v cca 1.1 to 2.7 power supply voltage v ccb 1.65 to 3.6 v input voltage (a1, oe ) v in 0 to 3.6 v 0 to 3.6 (note 2) output voltage (b1) v outb 0 to v ccb (note 3) v 3 (note 4) 2 (note 5) output current (b1) i outb 0.5 (note 6) ma operating temperature t opr ? 40 to 85 c input rise and fall time dt/dv 0 to 10 (note 7) ns/v note 1: the operating ranges must be maintai ned to ensure the normal op eration of the device. unused inputs must be tied to either v cc or gnd. note 2: output in off state note 3: high or low state note 4: v ccb = 3.0 to 3.6 v note 5: v ccb = 2.3 to 2.7 v note 6: v ccb = 1.65 to 1.95 v note 7: v in = 0.8 to 2.0 v, v cca = 2.5 v, v ccb = 3.0 v
TC7SPN3125CFC 2014-03-01 4 electrical characteristics dc characteristics (1.1 v v cca 2.7 v, 1.65 v v ccb 3.6 v) ta = ? 40 to 85c characteristics symbol test condition v cca (v) v ccb (v) min max unit 1.1 v cca <1.4 1.65 to 3.6 0.65 v cca ? 1.4 v cca <1.65 1.65 to 3.6 0.65 v cca ? 1.65 v cca <2.3 2.3 to 3.6 0.65 v cca ? h-level input voltage v iha a1, oe 2.3 v cca <2.7 2.7 to 3.6 1.6 ? v 1.1 v cca <1.4 1.65 to 3.6 ? 0.30 v cca 1.4 v cca <1.65 1.65 to 3.6 ? 0.30 v cca 1.65 v cca <2.3 2.3 to 3.6 ? 0.35 v cca l-level input voltage v ila a1, oe 2.3 v cca <2.7 2.7 to 3.6 ? 0.7 v i ohb = ? 100 a 1.1 to 2.7 1.65 to 3.6 v ccb ? 0.2 ? i ohb = ? 0.5 ma 1.1 to 1.65 1.65 1.25 ? i ohb = ? 2 ma 1.1 to 2.3 2.3 1.7 ? h-level output voltage v ohb a1 = v ih i ohb = ? 3 ma 1.1 to 2.7 3.0 2.2 ? v i olb = 100 a 1.1 to 2.7 1.65 to 3.6 ? 0.2 i olb = 0.5 ma 1.1 to 1.65 1.65 ? 0.3 i olb = 2 ma 1.1 to 2.3 2.3 ? 0.6 l-level output voltage v olb a1 = v il i olb = 3 ma 1.1 to 2.7 3.0 ? 0.55 v 3-state output off state current i ozb a1 = v iha or v ila b1 = 0 to 3.6 v 1.1 to 2.7 1.65 to 3.6 ? 2.0 a input leakage current i in v in = 0 to 3.6 v 1.1 to 2.7 1.65 to 3.6 ? 1.0 a i off1 v in , b1 = 0 to 3.6 v 0 0 ? 2.0 i off2 1.1 to 2.7 0 ? 2.0 power-off leakage current i off3 oe = v cca a1, b1 = 0 to 3.6 v 1.1 to 2.7 open ? 2.0 a i cca v in = v cca or gnd 1.1 to 2.7 1.65 to 3.6 ? 2.0 i ccb v in = v cca or gnd 1.1 to 2.7 1.65 to 3.6 ? 2.0 i cca v cca < v in 3.6 v 1.1 to 2.7 1.65 to 3.6 ? 2.0 quiescent supply current i ccb v in = v cca v ccb b1 3.6 v 1.1 to 2.7 1.65 to 3.6 ? 2.0 a
TC7SPN3125CFC 2014-03-01 5 ac characteristics (ta = ? 40 to 85c, input: t r = t f = 2.0 ns) v cca = 2.5 0.2 v, v ccb = 3.3 0.3 v characteristics symbol te st condition min max unit propagation delay time (a1 b1) t plh t phl figure 1, figure 2 1.0 13.7 3-state output enable time ( oe b1) t pzl t pzh figure 1, figure 3 1.0 16.6 3-state output disable time ( oe b1) t plz t phz figure 1, figure 3 1.0 7.2 ns v cca = 1.8 0.15 v, v ccb = 3.3 0.3 v characteristics symbol te st condition min max unit propagation delay time (a1 b1) t plh t phl figure 1, figure 2 1.0 14.8 3-state output enable time ( oe b1) t pzl t pzh figure 1, figure 3 1.0 18.9 3-state output disable time ( oe b1) t plz t phz figure 1, figure 3 1.0 8.7 ns v cca = 1.5 0.1 v, v ccb = 3.3 0.3 v characteristics symbol te st condition min max unit propagation delay time (a1 b1) t plh t phl figure 1, figure 2 1.0 16.0 3-state output enable time ( oe b1) t pzl t pzh figure 1, figure 3 1.0 22.8 3-state output disable time ( oe b1) t plz t phz figure 1, figure 3 1.0 10.2 ns v cca = 1.2 0.1 v, v ccb = 3.3 0.3 v characteristics symbol te st condition min max unit propagation delay time (a1 b1) t plh t phl figure 1, figure 2 1.0 29 3-state output enable time ( oe b1) t pzl t pzh figure 1, figure 3 1.0 63 3-state output disable time ( oe b1) t plz t phz figure 1, figure 3 1.0 23 ns
TC7SPN3125CFC 2014-03-01 6 v cca = 1.8 0.15 v, v ccb = 2.5 0.2 v characteristics symbol te st condition min max unit propagation delay time (a1 b1) t plh t phl figure 1, figure 2 1.0 18.5 3-state output enable time ( oe b1) t pzl t pzh figure 1, figure 3 1.0 23.6 3-state output disable time ( oe b1) t plz t phz figure 1, figure 3 1.0 6.9 ns v cca = 1.5 0.1 v, v ccb = 2.5 0.2 v characteristics symbol te st condition min max unit propagation delay time (a1 b1) t plh t phl figure 1, figure 2 1.0 19.7 3-state output enable time ( oe b1) t pzl t pzh figure 1, figure 3 1.0 26.6 3-state output disable time ( oe b1) t plz t phz figure 1, figure 3 1.0 8.3 ns v cca = 1.2 0.1 v, v ccb = 2.5 0.2 v characteristics symbol te st condition min max unit propagation delay time (a1 b1) t plh t phl figure 1, figure 2 1.0 33 3-state output enable time ( oe b1) t pzl t pzh figure 1, figure 3 1.0 66 3-state output disable time ( oe b1) t plz t phz figure 1, figure 3 1.0 20 ns v cca = 1.2 0.1 v, v ccb = 1.8 0.15 v characteristics symbol te st condition min max unit propagation delay time (a1 b1) t plh t phl figure 1, figure 2 1.0 43 3-state output enable time ( oe b1) t pzl t pzh figure 1, figure 3 1.0 78 3-state output disable time ( oe b1) t plz t phz figure 1, figure 3 1.0 20 ns
TC7SPN3125CFC 2014-03-01 7 capacitive characteristics (ta=25c) characteristics symbol test condition v cca (v) v ccb (v) typ. unit input capacitance c in oe , a1 2.5 3.3 7 pf output capacitance c out b1 2.5 3.3 8 pf oe =?l? 2.5 3.3 3 c pda oe =?h? 2.5 3.3 0 oe =?l? 2.5 3.3 13 power dissipation capacitance (note) c pdb oe =?h? 2.5 3.3 0 pf note: c pd is defined as the value of the internal equivalent capacitance which is ca lculated from the operating current consumption without load. average operating current can be obtained by the equation: i cc (opr) = c pd ?v cc ?f in + i cc /2 (per bit) ac test circuit v ccb symbol 3.3 0.3 v 2.5 0.2 v 1.8 0.15 v r l 1 k 1 k c l 30 pf 30 pf figure 1 v ccb open gnd switch out p ut measure r l c l parameter switch t plh , t phl open t plz , t pzl v ccb t phz , t pzh gnd
TC7SPN3125CFC 2014-03-01 8 ac waveform v cca , v ccb symbol 3.3 0.3 v 2.5 0.2 v 1.8 0.15 v 1.5 0.1 v 1.2 0.1 v v ih - v cca v cca input v im - v cca / 2 v cca / 2 v om v oh / 2 v oh / 2 - v x v ol + 0.3 v v ol + 0.15 v - output v y v oh ? 0.3 v v oh ? 0.15 v - figure 2 t plh , t phl 90% 10% output (b1) input (a1) v ol v oh v ih v om t plh t phl t r 2.0 ns t f 2.0 ns v im gnd 90% 10% v ol 3.0v or v ccb gnd v ih v om t phz t pzh t r 2.0 ns t f 2.0 ns v i m gnd v oh output enabled v om t plz t pzl v y output disabled output enabled output enable control ( oe ) output (b1) low to off to low output (b1) high to off to high v x figure 3 t plz , t phz , t pzl , t pzh
TC7SPN3125CFC 2014-03-01 9 package dimensions weight: 0.002 g (typ.) cson6-p-0.45
TC7SPN3125CFC 2014-03-01 10 restrictions on product use ? toshiba corporation, and its subsidiaries and affiliates (collect ively "toshiba"), reserve the right to make changes to the in formation in this document, and related hardware, software and systems (collectively "product") without notice. ? this document and any information herein may not be reproduc ed without prior written permission from toshiba. even with toshiba's written permission, reproduc tion is permissible only if reproducti on is without alteration/omission. ? though toshiba works continually to improve product's quality and reliability, product can malfunction or fail. customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situat ions in which a malfunction or failure of product could cause loss of human life, b odily injury or damage to property, including data loss or corruption. before customers use the product, create designs including the product, or incorporate the product into their own applications, cu stomers must also refer to and comply with (a) the latest ve rsions of all relevant toshiba information, including without limitation, this document, the specifications, the data sheets and applicat ion notes for product and the precautions and condi tions set forth in the "toshiba se miconductor reliability handbook" and (b) the instructions for the application with which the product will be us ed with or for. customers are solely responsible for all aspe cts of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this product in such design or applications; (b) eval uating and determining the applicability of any info rmation contained in this document, or in c harts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operatin g parameters for such designs and applications. toshiba assumes no liability for customers' product design or applications. ? product is neither intended nor warranted fo r use in equipments or systems that require extraordinarily high levels of quality and/or reliability, and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage and/or serious public impact ( " unintended use " ). except for specific applications as expressly stated in this document, unintended use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used f or automobiles, trains, ships and other transportation, traffic si gnaling equipment, equipment used to control combustions or expl osions, safety devices, elevators and escalators, devices related to electric power, and eq uipment used in financ e-related fields. if you use product for unintended use, toshiba assumes no liability for product. for details, please contact your toshiba sales representative. ? do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy product, whether in whole or in part. ? product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. ? the information contained herein is pres ented only as guidance for product use. no re sponsibility is assumed by toshiba for an y infringement of patents or any other intellectual property rights of third parties that may result from the use of product. no license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. ? absent a written signed agreement, except as provid ed in the relevant terms and conditions of sale for product, and to the maximum extent allowable by law, toshiba (1) assumes no liability whatsoever, including without limitation, indirect, co nsequential, special, or incidental damages or loss, including without limitation, loss of profit s, loss of opportunities, business interruption and loss of data, and (2) disclaims any and all express or implied warranties and conditions related to sale, use of product, or information, including warranties or conditions of merchantability, fitness for a particular purpose, accuracy of information, or noninfringement. ? do not use or otherwise make available product or related so ftware or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or m anufacturing of nuclear, chemical , or biological weapons or missi le technology products (mass destruction w eapons). product and related software and technology may be controlled under the applicable export laws and regulations includ ing, without limitation, the japanese fo reign exchange and foreign trade law and t he u.s. export administration regulat ions. export and re-export of product or related software or technology are strictly prohibit ed except in compliance with all appl icable export laws and regulations. ? please contact your toshiba sales representative for details as to environmental matters such as the rohs compatibility of pro duct. please use product in compliance with all applicable laws and regula tions that regulate the inclus ion or use of controlled subs tances, including without limitation, the eu rohs directive. toshiba assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations.
|
